Changing steering rack is not an easy job if you are doing it by yourself. This task mostly done by mechanic but you can also do it. All you have to do is prepare all the things that is needed.
You will need screwdrivers, a ratchet and socket set with extensions, wrenches, a hammer, pliers, a wire brush, power steering filter, power steering fluid, automatic transmission fluid, a tie rod separator, a jack, jack stands, possibly an engine support fixture, and of course the new power steering rack.
When I tried to my ford steering rack, it is really a tough job. This is step by step tutorials:
First, loosen all the wheel lug nuts and jack up the front of the car. Then, take off both front wheels. Start with the steering wheel turned forward, and turn it slowly until you can get a socket to the steering shaft joint bolt. After you take the bolt off, use the screwdriver to tap the universal joint upwards. This ensures that you can easily move the spline clamp. Don’t remove the spline clamp just yet. Unbolt the bolts under the front plastic pan, then remove it. Next, unbolt the tie rod bolt on the hubs on both sides. Take the tie rod separator; push them out on both sides. Loosen first the tie rod locking bolt, then the tie rod ball joint. Remove the rubber boot and loosen the ball joint. Unbolt the hydraulic feed-and-return line, and remove the steering rack mounting bolts. Have your helper turn the steering wheel right, then drop the rack down that side. Then, do the same for the opposite side.
Take the hydraulic line holder bracket, boot, mounting rubber, metal bracket and put them on the new rack. Since the wheel is already to the left, install that side first. Then, position the spline shaft and clamp correctly. Once it’s done, turn the wheel and do the same for the other side. Reinstall the mounting bolts on the steering rack. Install the feed-and-return hydraulic lines. Center the steering rack and steering wheel. Re-install the ball joint, rubber boot, then tie rods. Install the steering column universal shaft spline clamp bolt, then install the front pan. Put the front wheels back on.
Abarth tried to secure the models that it can from the wide network of Fiat. They received the IRC title in the formative year as the
The pricing schedule released by
Subaru is on the way of adding a new edge to its famous all-wheel drive at the coming up Tokyo Motor Show in the next month. The concept of a
There came the Honda Insight just after some weeks of the rumors that were twirling around our Long Term Vehicle Fleet Department. The
It has been a report from the Auto Express of UK who has reported that the concept of
It has been a report from the Auto Express of UK who has reported that the concept of
The
The introduction of the new